更新时间：2020-09-25 15:28:57
封面
版权信息
Foreward
1 General Provisions
2 Terms
3 Material Test
3.1 General Requirements
3.2 Single-drum Optical Fiber Cable Examination
3.3 Single-drum Cable Examination
3.4 Wire Pole Examination
3.5 Examination of Silicon-core Pipe and Accessories
3.6 Examination of Stranded Galvanized Steel Wire and Ironware
3.7 Joint Box and Splice Jacket Examination
3.8 Connector Examination
3.9 Distribution Frame Examination
3.10 Distribution Cabinet Examination
3.11 Examination on Microduct，Microduct Bundle，Microduct Cable and Microduct Accessories
3.12 Other Cable Line Material Examination
4 Cable Route
5 Earth Works
5.1 Excavation
5.2 Backfilling
6 Overhead Pole Line for Overhead Cable
6.1 Pole Erecting
6.2 Pole Extension
6.3 Pole Footing
6.4 Stay Wire
6.5 Bracing Pole
6.6 Pole Numbering
6.7 Overhead Suspension Wire
7 Laying of Optical（Electrical）Cables
7.1 General Requirements
7.2 Laying of Directly-buried Optical（Electrical）Cables
7.3 Installation of Overhead Optical（Electrical）Cables
7.4 Installation of Wall-mounted Optical（Electrical）Cables
7.5 Laying of Duct Optical（Electrical）Cables
7.6 Laying of Underwater Optical（Electrical）Cables
7.7 Leading-up of Optical（Electrical）Cables
7.8 Laying of Micro Duct and Micro Cable
7.9 Laying and Installation of Silicon-cored Plastic Duct
7.10 Manhole（Handhole）Construction of Silicon-cored Plastic Pipe
8 Cable Line Protection and Preservation
8.1 Built-in Pipe，Brick-Paving，Cover-board，and Cement Mortar Bag
8.2 Terrace Slope Reinforcement and Protection
8.3 Protection of Underwater Optical（Electrical）Cable
8.4 Protection of Pole Line，Stay Wire，Suspension Wire and Overhead Line
8.5 Protection of Silicon-cored Pipe
8.6 Stone Marker and Sign Board
8.7 Protection against High Power
8.8 Lightning Protection
8.9 Other Protection Requirements
9 Optical（Electrical）Cable Cross Connection Box and Distribution Device
9.1 Installationof Optical（Electrical）Cable Cross Connection Box
9.2 Installation of Distribution Device
10 Optical（Electrical）Cable Splicing
10.1 General Requirement
10.2 Optical Cable Splicing and Encapsulation
10.3 Splicing and Encapsulation of Electrical Cable
11 Optical（Electrical）Cable Lead-in and Termination
11.1 Installation of Optical（Electrical）Cable in the Equipment Room
11.2 Installation of Optical Cable Termination
11.3 Installation of Electrical Cable Termination
12 Optical（Electrical）Cable Test
12.1 Optical Cable Test
12.2 Electrical Cable Test
13 Preparation of As-built Documentation
14 Final Acceptance of Work
14.1 Follow-up Test
14.2 Preliminary Acceptance
14.3 Trial-run
14.4 Final Acceptance
Appendix A Single-drum and Whole-process Test Parameters for Copper-cored Plastic Cables
Appendix B Requirements for Earthing Resistance of Lightning Wire and Length of Extension Line（Underground Part）
Appendix C Requirements for Earthing Resistance of Optical（Electrical）Cable Suspension Wires and Other Facilities
Appendix D Original Erection Sag for Suspension Wire of Overhead Optical（Electrical）Cable
Appendix E Test Record for Repeater Section of Optical Cable Line
Appendix F Permissible Reduction Value of Air Plug Pressure
Appendix G Permissible Air Pressure Reduction of Plastic Cable in 24h
Explanation of Wording in This Code
List of Quoted Standards
