References

［1］ Beyer C. Strategic implications of current trends in additive manufacturing［J］. Journal of Manufacturing Science and Engineering，2014，136（6）: 064701.

［2］ ASTM F2792-12a. Standard terminology for additive manufacturing technologies［S］. ASTM International，2012.

［3］ Tootooni M S，Dsouza A，Donovan R，et al. Classifying the dimensional variation in additive manufactured parts from laser-scanned three-dimensional point cloud data using machine learning approaches［J］. Journal of Manufacturing Science and Engineering，2017，139（9）:091005.

［4］ Liu C，Law A C C，Roberson D，et al. Image analysis-based closed loop quality control for additive manufacturing with fused filament fabrication［J］. Journal of Manufacturing Systems，2019，51: 75-86.

［5］ Buchbinder D，Schleifenbaum H，Heidrich S，et al. High power selective laser melting（HPSLM） of aluminum parts［J］. Physics Procedia，2011，12（1）: 271-278.

［6］ Pinto M A，Cheung N，Ierardi M C F，et al. Microstructural and hardness investigation of an aluminum-copper alloy processed by laser surface melting［J］. Materials Characterization，2003，50: 249-253.

［7］ Wang W C and Chang C Y. Flow analysis of the laminated manufacturing system with laser sintering of metal powder. Part I: flow uniformity inside the working chamber［J］. International Journal of Advanced Manufacturing Technology，2017，92: 1299-1314.

［8］ Ladewig A，Schlick G，Fisser M，et al. Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process［J］. Additive Manufacturing，2016，10: 1-9.

［9］ Ferrar B，Mullen L，Jones E，et al. Gas flow effects on selective laser melting （SLM）manufacturing performance［J］. Journal of Materials Processing Technology，2012，212:355-364.

［10］ Kong C J，Tuck C J，Ashcroft I A，et al. High density Ti6Al4V vie SLM processing:microstructure and mechanical properties［J］. International Solid Freeform Fabrication Symposium，2011，36: 475-483.

［11］ Ly S，Rubenchik A M，Guss G，et al. Probing molten pool dynamics and particle ejection using high speed optical diagnostics［C］//Conference on Lasers and Electro-Optics （CLEO），2016.

［12］ Aeschliman D B，Bajic S J，Baldwin D P，et al. High-speed digital photographic study of an inductively coupled plasma during laser ablation: comparison of dried solution aerosols from a microconcentric nebulizer and solid particles from laser ablation［J］. Journal of Analytical Atomic Spectrometry，2003，18（9）: 1008-1014.

［13］ Matthews M J，Guss G，Khairallah S A，et al，Denudation of metal powder layers in Laser Powder Bed Fusion processes［J］. Acta Materialia，2016，114: 33-42.

［14］ Chen L W，Li H，Liu S，et al. Simulation of surface deformation control during selective laser melting of AlSi10Mg powder using an external magnetic field［J］. AIP Advances，2019，9（4）:045012.

［15］ Zhang T，Li H，Liu S，et al. Evolution of molten pool during selective laser melting of Ti-6Al-4V［J］. Journal of Physics D: Applied Physics，2019，52（5）: 055302.

［16］ Dal K and Shaw L. Finite element analysis of the effect of volume shrinkage during laser densification［J］. Acta Materialia，2005，53（18）: 4743-4754.

［17］ Guha A. Transport and deposition of particles in turbulent and laminar flow［J］. Annual Review of Fluid Mechanics，2008，40: 311-341.

［18］ Anwar A B and Pham Q C. Effect of inert gas flow velocity and unidirectional scanning on the formation and accumulation of spattered powder during selective laser melting［C］//2nd International Conference on Progress in Additive Manufacturing （Pro-AM），2016.

［19］ Khorasani A，Gibson I，Awan U S，et al. The effect of SLM process parameters on density，hardness，tensile strength and surface quality of Ti-6Al-4V［J］. Additive Manufacturing，2019，25: 176-186.

［20］ Fu C H and Guo Y B. Three-dimensional temperature gradient mechanism in selective laser melting of Ti-6Al-4V［J］. Journal of Manufacturing Science and Engineering，2014，136（6）:061004.

［21］ Rai R，Elmer J W，Palmer T A，et al. Heat transfer and fluid flow during keyhole mode laser welding of tantalum，Ti-6Al-4V，304L stainless steel and vanadium［J］. Journal of Physics D:Applied Physics，2007，40（18）: 5753-5766.

［22］ Deng J，Zhong H P，Gong Y C，et al. Studies on injection and mixing characteristics of high pressure hydrogen and oxygen jet in argon atmosphere［J］. Fuel，2018，226: 454-461.

［23］ Barron R F and Gregory G F. Cryogenic Heat Transfer，second ed［M］. Boca Raton: Crc Press，2017.

［24］ Jin K，Vanka S P，Thomas B G. Large eddy simulations of electromagnetic braking effects on argon bubble transport and capture in a steel continuous casting mold［J］. Metallurgical and Materials Transactions，2018，49（3）: 1360-1377.

［25］ Gong H，Rafi K，Starr T，et al. The effects of processing parameters on defect regularity in Ti-6Al-4V parts fabricated by selective laser melting and electron beam melting［C］// 24th Annual International Solid Freeform Fabrication Symposium-An Additive Manufacturing Conference，2013.

［26］ Heeling T，Gerstgrasser M，Wegener K. Investigation of selective laser melting spatter characteristics for single-and multi-beam strategies using high speed imaging［C］//Lasers in Manufacturing Conference，2017.