Understanding third-party integration
One of the most attractive reasons to deploy ACI is the ease of integration with other Cisco products (such as the ASAv firewall) and third-party systems.
This integration is performed through OpFlex. OpFlex is an open standards-based southbound protocol, designed to facilitate multi-vendor integration in both data center and cloud networks. OpFlex is important as it distinguishes ACI from other SDN models, which have integration but do not support the full feature set. The easiest way to try and explain this would be to look at it in the context of SNMP.
SNMP (Simple Network Management Protocol) allows monitoring network hardware, and all devices support the most basic MIB (Management Information Base) of iso.org.dod.internet.mgmt, so at the most basic level, you can pull out data such as interfaces and IP addresses. We are getting data but at the lowest common denominator. We need extra information, by way of specific MIBs, to be able to monitor our firewall’s VPN tunnels or the nodes in our load balancers. OpFlex gives us all the information, but the data is not bound to any particular format. It is a declarative model, which benefits any interested party. This declarative model is based on promise theory.
Promise theory, developed by Mark Burgess in the 1990s, sets ACI apart from other SDN implementations. They use imperative control, in which we have a controlling system, and the system being controlled is relieved of the burden of doing the thinking. While this does offer more autonomy to the controller, it can also create a bottleneck within the system. ACI, however, uses a declarative model. This model states what should happen but not how it should be done (leaving that up to the node being controlled). The node then makes a promise to achieve the desired state and, importantly, communicates back to the controller the success or failure of the task, along with the reason why. The controller is no longer a bottleneck in the system, and the commands are simpler; instead of separate commands to implement the same function on different vendor equipment, we have one command set understandable by both vendors' equipment. This is the benefit of open standards.
Even with open standards, though, there can be some ulterior motive. It is all well and good having the next best thing for integrating different technologies, but when this is designed for those technologies to run under one particular company's product, there can be some hesitation. However, there is a large backing from several renowned companies, such as Microsoft, IBM, Citrix, Red Hat, F5, SunGard Availability Services, and Canonical. So why has OpFlex gathered such a wide backing?
With the traditional SDN model, there is a bottleneck: the SDN controller. As we scale out, there is an impact on both performance and resilience. We also lose simplicity and agility; we still need to make sure that all the components are monitored and safeguarded, which invariably means bolting on more technology to achieve this.
OpFlex takes a different approach. A common language ensures that we do not need to add any extras that are not part of the original design. There is still complexity, but it is moved toward the edges of the network, and we maintain resilience, scalability, and simplicity. If we lose all of the controllers, then the network continues to operate--we may not be able to make policy changes until we restore the controllers, but the tenant’s data still flows, uninterrupted.
The protocol itself uses XML or JSON as the transmission medium. It allows us to see each node as a managed object (MO). Each MO consists of the following:
- Properties
- Child relations
- Parent relations
- MO relations
- Statistics
- Faults
- Health
While the ins and outs of these are beyond the scope of this book, you can read about them more in the IETF drafts. The first one in 2014 (https://tools.ietf.org/html/draft-smith-opflex-00) listed all these seven items, but subsequent drafts--the most recent being October 27, 2016 (https://tools.ietf.org/html/draft-smith-opflex-03)--compress the last four items into one, labeled observables.
What all this means is that for third-parties, OpFlex means greater integration across SDN platforms. If and when OpFlex does become a truly open standard, different vendors, equipment will be able to speak the same language using a simple JSON file.