参 考 文 献

［1］　Inoue A，Stabilization of metallic super cooled liquid and bulk amorphous alloys［J］.Acta Mater，2000，48（1）： 279-306.

［2］　Cantor B，Chang I T H，Knight P，et al.Microstructural development in equiatomic multicomponent alloys［J］.Materials Science & Engineering A，2004，375-377（1）：213-218.

［3］　Gao M C，Liaw P K，Yeh J W，et al.High-entropy alloys： fundamentals and applications［M］，Springer，2016.

［4］　Zhang Y，Yang X，Liaw P K.Alloy Design and Properties Optimization of High-Entropy Alloys［J］.JOM，2012，64（7）：830-838.

［5］　Zhang Y，Zhou Y，Lin J，et al.Solid-Solution Phase Formation Rules for Multi-component Alloys［J］.Advanced Engineering Materials，2010，10（6）：534-538.

［6］　张勇.非晶和高熵合金［M］.北京：科学出版社，2010.

［7］　周云军，张勇，王艳丽，等.多组元Al_xTiVCrMnFeCoNiCu高熵合金的室温力学性能［J］.工程科学学报，2008，30（7）：765-769.

［8］　叶均蔚，陈瑞凯，高熵合金［J］，科学发展，2004：16-21.

［9］　Yeh J.W，Chen S.K，Lin S.J，et al.Nanostructured High-Entropy Alloys with Multiple Principal Elements： Novel Alloy Design Concepts and Outcomes［J］.Advanced Engineering Materials，2004，6（5）：299-303.

［10］　Senkov O N，Wilks G B，Miracle D B，et al.Refractory high-entropy alloys［J］.Intermetallics，2010，18（9）：1758-1765.

［11］　Senkov O N，Senkova S V，Miracle D B，et al.Mechanical properties of low-density，refractory multi-principal element alloys of the Cr-Nb-Ti-V-Zr system［J］.Materials Science & Engineering A Structural Materials Properties Microstructure & Processing，2013，565（5）：51-62..

［12］　Nagase T，Anada S，Rack P D，et al.MeV electron-irradiation-induced structural change in the bcc，phase of Zr-Hf-Nb alloy with an approximately equiatomic ratio［J］.Intermetallics，2013，38（3）：70-79.

［13］　Wang Shaoqing，Atomic structure modeling of multi-principal-element alloys by the principle of maximum entropy［J］，Entropy，2013，15（12）：5536-5548.

［14］　Pradeep K G，Tasan C C，Yao M J，et al.Non-equiatomic high entropy alloys： Approach towards rapid alloy screening and property-oriented design［J］.Materials Science & Engineering A，2015，648：183-192.

［15］　Yang X，Chen S Y，Cotton J D，et al.Phase Stability of Low-Density，Multiprincipal Component Alloys Containing Aluminum，Magnesium，and Lithium［J］.JOM，2014，66（10）：2009-2020.

［16］　Liu W H，Wu Y，He J Y，et al.Grain growth and the Hall-Petch relationship in a high-entropy FeCrNiCoMn alloy［J］.Scripta Materialia，2013，68（7）：526-529.

［17］　Tian F，Varga L K，Chen N，et al.Ab initio investigation of high-entropy alloys of 3d elements［J］.Physical Review B，2013，87（7）：178-187.

［18］　Otto F，Yang Y，Bei H，et al.Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys［J］.Acta Materialia，2013，61（7）：2628-2638.

［19］　Zhang Y，Zuo T T，Cheng Y Q，et al.High-entropy Alloys with High Saturation Magnetization，Electrical Resistivity，and Malleability［J］.Scientific Reports，2013，3（6125）：1455.

［20］　Li H F，Xie X H，Zhao K，et al.In vitro and in vivo studies on biodegradable CaMgZnSrYb high-entropy bulk metallic glass［J］.Acta Biomaterialia，2013，9（10）：8561-8573.

［21］　Senkov O N，Wilks G B，Scott J M，et al.Mechanical properties of Nb₂₅Mo₂₅Ta₂₅W₂₅ and V₂₀Nb₂₀Mo₂₀Ta₂₀W₂₀ refractory high entropy alloys［J］.Intermetallics，2011，19（5）：698-706.

［22］　Z Yu，H Ma，Spolenak R.Ultrastrong ductile and stable high-entropy alloys at small scales［J］.Nature Communications，2015，6：7748.

［23］　Yao H W，Qiao J W，Gao M C，et al.NbTaV-（Ti，W） Refractory High-entropy Alloys： Experiments and Modeling［J］.Materials Science & Engineering A，2016，674：203-211.

［24］　Yeh J W.Alloy Design Strategies and Future Trends in High-Entropy Alloys［J］.Jom，2013，65（12）：1759-1771.

［25］　Miracle D B，Senkov O N.A critical review of high entropy alloys and related concepts［J］.Acta Materialia，2017，122：448-511.

［26］　Anand G，Goodall R，Freeman C L.Role of configurational entropy in body-centred cubic or face-centred cubic phase formation in high entropy alloys［J］.Scripta Materialia，2016，124：90-94.

［27］　Zhang Y，Lu Z P，Ma S G，et al.Guidelines in predicting phase formation of high-entropy alloys［J］.Mrs Communications，2014，4（2）：57-62.

［28］　Chou Hsuan-Ping，Chang Yee-Shyi，Chen Swe-Kai，et al.Microstructure，thermophysical and electrical properties in Al_xCoCrFeNi

（0≤x≤2） high-entropy alloys［J］.Materials Science & Engineering B，2009，163（3）：184-189.

［29］　Porter D A，Easterling K E.Phase Transformations in Metals and Alloys，Third Edition （Revised Reprint）［M］.Chapman & Hall，1992.

［30］　Tsai K Y，Tsai M H，Yeh J W.Sluggish diffusion in Co-Cr-Fe-Mn-Ni high-entropy alloys［J］.Acta Materialia，2013，61（13）：4887-4897.

［31］　Lindley M W，Jones B F.Thermal stability of silicon carbide fibres［J］.1975，255（5508）：474-475.

［32］　Bansal N P.Handbook of Ceramic Composites［M］.Springer US，2005.

［33］　Gludovatz B，Hohenwarter A，Catoor D，et al.A fracture-resistant high-entropy alloy for cryogenic applications［J］.Science，2014，345（6201）：1153-1158.

［34］　Li D Y，Zhang Y.The ultrahigh charpy impact toughness of forged Al_xCoCrFeNi high entropy alloys at room and cryogenic temperatures［J］.Intermetallics，2016，70：24-28.

［35］　Santodonato L J，Zhang Y，Feygenson M，et al.Deviation from high-entropy configurations in the atomic distributions of a multi-principal-element alloy.［J］.Nature Communications，2015，6：5964.

［36］　Ye Y F，Wang Q，Lu J，et al.High-entropy alloy： challenges and prospects［J］.Materials Today，2016，19（6）：349-362.

［37］　Seifi M，Li D，Yong Z，et al.Fracture Toughness and Fatigue Crack Growth Behavior of As-Cast High-Entropy Alloys［J］.JOM，2015，67（10）：2288-2295.

［38］　张素芳，杨潇，张勇，等.AlCrCuFeNi高熵合金单晶材料的制备及性能［J］.金属学报，2013，49（11）：1473-1480.

［39］　Sheng W J，Yang X，Wang C，et al.Nano-Crystallization of High-Entropy Amorphous NbTiAlSiWxNy Films Prepared by Magnetron Sputtering［J］.Entropy，2016，18（6）：226.

［40］　Li D Y，Li C，Feng T，et al.High-entropy Al_0.3CoCrFeNi alloy fibers with high tensile strength and ductility at ambient and cryogenic temperatures［J］.Acta Materialia，2017，123：285-294.

［41］　Li D Y，Zhang S L，Liao W B，et al.Superelasticity of Cu-Ni-Al shape-memory fibers prepared by melt extraction technique［J］.矿物冶金与材料学报，2016，23（8）：928-933.

［42］　Youssef K M，Zaddach A J，Niu C，et al.A Novel Low-Density，High-Hardness，High-entropy Alloy with Close-packed Single-phase Nanocrystalline Structures［J］.Materials Research Letters，2015，3（2）：95-99.

［43］　Otto F，Dlouh􀆪 A，Somsen C，et al.The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy［J］.Acta Materialia，2013，61（15）：5743-5755.

［44］　Yao M J，Pradeep K G，Tasan C C，et al.A novel，single phase，non-equiatomic FeMnNiCoCr high-entropy alloy with exceptional phase stability and tensile ductility［J］.Scripta Materialia，2014，72-73（1）：5-8.

［45］　Zhou Y J，Zhang Y，Wang Y L，et al.Solid solution alloys of AlCoCrFeNiTix with excellent room-temperature mechanical properties［J］.Applied Physics Letters，2007，90（18）：253.

［46］　Zhou Y J，Zhang Y，Wang F J，et al.Effect of Cu addition on the microstructure and mechanical properties of AlCoCrFeNiTi 0.5，solid-solution alloy［J］.Journal of Alloys & Compounds，2008，466（1）：201-204.

［47］　He J Y，Liu W H，Wang H，et al.Effects of Al addition on structural evolution and tensile properties of the FeCoNiCrMn high-entropy alloy system［J］.Acta Materialia，2014，62（1）：105-113.

［48］　Qiao J W，Ma S G，Huang E W，et al.Microstructural Characteristics and Mechanical Behaviors of AlCoCrFeNi High-Entropy Alloys at Ambient and Cryogenic Temperatures［J］.Materials Science Forum，2011，688（688）：419-425.

［49］　Hemphill M A，Yuan T，Wang G Y，et al.Fatigue behavior of Al_0.5CoCrCuFeNi high entropy alloys［J］.Acta Materialia，2012，60（16）：5723-5734.

［50］　Zhang Y，Zuo T T，Tang Z，et al.Microstructures and properties of high-entropy alloys［J］.Progress in Materials Science，2014，61（8）：1-93.

［51］　Otto F，Hanold N L，George E P.Microstructural evolution after thermomechanical processing in an equiatomic，single-phase CoCrFeMnNi high-entropy alloy with special focus on twin boundaries［J］.Intermetallics，2014，54（18）：39-48.

［52］　Ren B，Liu Z X，Cai B，et al.Aging behavior of a CuCr₂ Fe₂ NiMn high-entropy alloy［J］.Materials & Design，2012，33（1）：121-126.

［53］　Kao Y F，Lee T D，Chen S K，et al.Electrochemical passive properties of Al_xCoCrFeNi （x=0，0.25，0.50，1.00） alloys in sulfuric acids［J］.Corrosion Science，2010，52（3）：1026-1034.

［54］　Tsao L C，Chen C S，Fan K H，et al.Effect of the Annealing Treatment on the Microstructure，Microhardness and Corrosion Behaviour of Al_0.3CrFe_1.5MnNi_0.5 High-Entropy Alloys［J］.Advanced Materials Research，2013，748（4）：79-85.

［55］　Chou Y L，Yeh J W，Shih H C.Effect of Molybdenum on the Pitting Resistance of Co_1.5CrFeNi_1.5Ti₀.5Mo_x Alloys in Chloride Solutions［J］.Corrosion-Houston Tx-，2011，67（8）.

［56］　Chen Y Y，Duval T，Hung U D，et al.Microstructure and electrochemical properties of high entropy alloys——a comparison with type-304 stainless steel［J］.Corrosion Science，2005，47（9）：2257-2279.

［57］　徐朝政，姜肃猛，马军，等.两种电弧离子镀Ni-Co-Cr-A1-Si-Y涂层的高温氧化行为［J］.金属学报，2009，45（8）：964-970.

［58］　Yang T F，Xia S，Liu S，et al.Precipitation behavior of Al_xCoCrFeNi high entropy alloys under ion irradiation［J］.Scientific Reports，2016，6：32146.

［59］　Jin K，Lu C，Wang L M，et al.Effects of compositional complexity on the ion-irradiation induced swelling and hardening in Ni-containing equiatomic alloys［J］.Scripta Materialia，2016，119：65-70.

［60］　Zuo T T，Li R B，Ren X J，et al.Effects of Al and Si addition on the structure and properties of CoFeNi equal atomic ratio alloy［J］.Journal of Magnetism & Magnetic Materials，2014，371（12）：60-68.

［61］　Wang X F，Zhang Y，Qiao Y，et al.Novel microstructure and properties of multicomponent CoCrCuFeNiTi_x alloys［J］.Intermetallics，2007，15（3）：357-362.

［62］　Tsai C W，Lai S W，Cheng K H，et al.Strong amorphization of high-entropy AlBCrSiTi nitride film［J］.Thin Solid Films，2012，520（7）：2613-2618.

［63］　Guo S，Liu C T.Phase stability in high entropy alloys： Formation of solid-solution phase or amorphous phase［J］.Progress in Natural Science： Materials Internals International，2011，21（6）：433-446.

［64］　Zhang Y，Qiao J W，Liaw P K.A Brief Review of High Entropy Alloys and Serration Behavior and Flow Units［J］.钢铁研究学报（英文版），2016，23（1）：2-6.

［65］　Stan M.Discovery and design of nuclear fuels［J］.Materials Today，2010，12（11）：20-28.